Thursday, April 26, 2012

How to Temporarily Disable McAfee Virus Protection

temporarily disable mcafee virus protection
The McAfee anti-virus program protects your computer from malicious software which can install itself without your knowledge.Protect from malicious virus you need Mcafee antivirus support. But it can get in the way of legitimate programs you are trying to install, so you may need to temporarily disable it from time to time. Here is a different method of disabling the program depending on whether you are using the stand-alone McAfee virus scan software or you have the entire McAfee Security Center suite.
If you want to delete Mcafee antivirus permanently from your system then follow this article-How to Delete McAfee From Your Computer.

McAfee Anti-Virus:

Step1:  Find the red "M" icon for the McAfee anti-virus program in the expanded system tray and right-click on it.

Step2: And try to look for an option in pop-up menu that says either "Exit" or "Disable" and click on it.

Step3: Click "Yes" when asked if you are sure you want to disable the McAfee anti-virus program. Double-click on the McAfee desktop icon or re-start the computer entirely to enable the program again.

McAfee Security Center:
If you want to change from mcafee security center then follow the given steps:

Step1: Locate the red "M" icon in the system tray at the bottom-right corner of the desktop. Double click on it to open the Security Center program.

Step2: Click on the "Advanced" tab and then choose the option labeled "Configure."

Step3: Click on the "Files" button on the top toolbar. Click on the "Disable" button at the center of the screen.

Step4: Enter in a time for the program to automatically turn back on in the text field at the right or restart the computer to turn McAfee Security Center back on.

If you want to repair Mcafee then follow this article-How to Repair McAfee Antivirus.

Tuesday, April 24, 2012

How to Remove the System Volume Information Virus

remove the system volume information virusWindows uses the System Volume Information to store settings and information about your computer's system configuration. Restore points for your computer saves the windows system restore. System Restore allows you to roll your computer back to a restore point in case of a crash or computer corruption. Sometimes the restore points in the System Volume Information become infected by a virus. To remove this virus from the system volume information, you must delete the infected restore points.Here given list of points will help you to remove the system volume information virus .

Windows 7:
  • From start menu, right click on computer and choose properties. Then it will open the system properties window.
  • Click on the System Protection link in the top left corner. This will launch the System Protection window.
  • Select your computer's main hard drive from the drive select list, then click the "Configure" button.
  • Select the option "Turn off system protection" under Restore Settings and click "OK." This will delete all restore points, including any that have been infected with a virus.
Windows XP:
  • From start menu, right click on computer and choose properties. Then it will open the system properties window.
  • Click on the "System Restore" tab in the properties window.
  • Select the option "Turn off system restore" then click ok
  • Click "Yes" to confirm that you want to turn off System Restore.
  • Allow your computer to change the System Restore setting. This will delete all restore points, including any that have been infected with a virus.
To solve any technical related or virus problems in your computer system  then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.


Thursday, April 19, 2012

How to Repair PC Security after a Virus Attack

repair pc security after a virus attack
After a virus attack, Windows always gets damaged and with problems involving the registry and/or our folders and documents. Viruses change many different settings on your computer so that the virus can steal information and download additional files to your computer. Repairing your PC’s security after a virus attack needs to be a top priority to prevent further virus attack and infection. Follow the given steps to repair your PC security after a virus attack.

Step1: update antivirus can easily protect virus, so you should update your antivirus software. Just click on the update button on the start page.

Step2: Online virus is most dangerous for your pc. When update is completed then disconnect your computer from internet. You don't want your computer to be infected with another virus through your modem while your security settings are still compromised.

Step3: After updating the software, you should restart your computer and hold down F6 to activate Safe Mode. Scan the system again in Safe Mode.

Step4: Again restart your computer normally and access your security settings through the Control Panel in the Start menu. Click on the Security Center and click on the Firewall to make sure it is enabled.

Step5: after completing the all above steps, then reconnect your system to the internet connection. Try to update your browser, which give better performance and closed the previous security breaches.And try to follow the given points.

  • Avoid Sharing Files via Unsecured Wireless Network
  • Install Good Antivirus on Your PC
  • Always Update Your Antivirus Software
  • Avoid Transferring Data via Strange Removable Disks
  • Avoid Browsing the Internet without Antivirus on Your PC

If you are unable to solve this problem then you can take online virus removal support from technical support company. To get online virus removal support, you can reach  online technical support service desk  from V tech-squad at their Toll Free No +1-877-452-9201.

Wednesday, April 11, 2012

How to Partition Without Losing Data in Windows XP

partition without losing data in windows xp
Partitioning a drive is the process of creating dividers on the drive. You may find that you have to change the partition size to increase or decrease the space on a particular drive. Creating multiple partitions carries the risk of losing data, though Windows XP allows a user to partition without losing data. However, you must have access to the Administrator account for XP before you can attempt it.

Step1: Login to XP under the Administrator account.

Step2: Click the "Start" button on the lower-left side of the screen and select "Run" from the Start menu.

Step3: Type "compmgmt.msc" in the Run window and click "OK." Select the "Disk Management" option.

Step4: Right-click on the unallocated space where you want to create the partition and select the "New Partition" option.

Step5: Click "Next" when the New Partition Wizard appears.

Step6: Choose the "Primary partition" option and click "Next."

Step7: Choose the size of the partition and click "Next." Assign a drive letter and click "Next."

Step8: Choose the "Format this partition with the following settings" option. Select the "NTFS" file system and assign a drive name. Click "Next."

Step9: Look over the options which you already selected and click "Finish" to create the partition.

If you need help managing your hard drive or any technical solution for your pc then you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201.

Tuesday, April 3, 2012

How to Fix Microsoft Error Code Stop: c0000135 User32

The Microsoft Windows XP recovery console allows you to easily fix the error Stop: c0000135 User32. This error occurs because of the corrupt user32.dll operating system file. Once this file is replaced with a fresh one from the Windows XP setup CD, the error is rectified. You will need administrator rights to perform this process.Follow the given steps to fix Microsoft error code .

Step1: Insert the Windows XP setup CD in the CD drive of your computer, and then restart your computer.

Step2: Press “R” on your keyboard when you see the Windows XP "Welcome to Setup" screen. This will start the Windows XP recovery console. If you are asked to enter the administrator password, type it and press “Enter.”

Step3: Type the following commands one by one, without quotes, at the command prompt, and then press “Enter.”
“EXPAND drive_letter1:\i386\user32.dll_ drive_letter2\windows\system32”
“EXPAND drive_letter1:\i386\userinit.ex_ drive_letter2\windows\system32”
Replace drive_letter1 here with the CD drive letter of your computer in which the Windows XP setup CD is present (for example, E:), and drive_letter2 here with the letter of the drive in which Windows XP is installed on your computer (for example, D:).

For Microsoft product support you can reach online technical support service desk of V tech-squad at their Toll Free No +1-877-452-9201